Accessible attic route
Ask for the main trunks, branch lengths, supply locations and the two return paths on the same drawing. Confirm that the bid includes insulation, sealed joints and airflow balancing.
Opens our partner's form on this page. Information goes directly to the partner. We may receive compensation if you submit a request. Availability varies by area.
For a first-time supply-and-return system in a 2,000-square-foot home, budget about $5,900–$12,700 as a starting point when the route is an accessible attic, the layout is standard and there are two return locations. This example uses our national planning calculator. San Diego contractors quote the actual route and scope.
Sources and ZIP coverage reviewed November 22, 2026.
The model covers new ducts with the stated routing and layout assumptions. It uses national rates without a San Diego adjustment. Price the equipment, plaster or drywall repair, electrical work and structural changes separately. Ask bidders to state how they handle permit fees and required testing.
Ask for the main trunks, branch lengths, supply locations and the two return paths on the same drawing. Confirm that the bid includes insulation, sealed joints and airflow balancing.
Ask where ceilings must be opened, who restores the finishes and whether the existing equipment can serve the added rooms. Get a separate bid for a limited addition using its own measured route.
Use the duct replacement guide if your project includes removal or disposal of old ducts. See the San Diego HVAC cost guide to budget for equipment.
Check the permitting jurisdiction for the street address first. Within the City of San Diego, HVAC installation generally requires a mechanical permit unless an exemption applies. Confirm whether your scope qualifies for a Simple No-Plan permit. Work that needs plan review or involves a historically designated or potentially historically designated property can require plans and calculations.
City Information Bulletin 103 lists more than 40 feet of new ductwork among the scopes requiring energy compliance verification for final inspection approval. Confirm the applicable testing and documentation with Development Services. Ask who schedules the test and inspection, who files the paperwork, and who pays for any required retest.
ASI Heating & Air describes new duct design for additions and remodels, including load calculations, sizing and routing. Viking Cooling & Heating offers an inspection before pricing installation. Their service pages provide ways to request a project estimate. A comparable local price for a first-time whole-home installation requires a measured scope.
In a hypothetical comparison, a $7,400 duct bid plus $500 for permit handling and testing and $850 for patching totals $8,750. Compare that total with a hypothetical $8,500 bid that includes those same items. Confirm that both bids also cover the same route, return locations, duct insulation and balancing.
Use the itemized HVAC quote checklist to record exclusions and warranty terms before you choose.
Enter your project ZIP and write “Install new ductwork” in Brief Description. Say whether you need a first-time system or runs for an addition, which rooms need service and where the installer can access the route. The November 22 partner priority list includes 92103, 92104 and 92109 for this service. Matching depends on the address and project.
Opens our partner's form on this page. Information goes directly to the partner. We may receive compensation if you submit a request. Availability varies by area.
For a 2,000-square-foot home with open attic access, a standard layout and two return locations, our national planning model gives about $5,900–$12,700 for new supply and return ducts. The example uses national rates. Get a written San Diego quote for your route, permit and testing scope.
The City requires a mechanical permit for HVAC installation unless an exemption applies. Ask Development Services whether your address and scope qualify for a No-Plan permit or need plans. The City lists more than 40 feet of new ducts among the scopes requiring energy compliance verification for final approval.
Ask for the duct route, supply registers, return grilles, materials, sealing and balancing. Have bidders itemize permit handling, required diagnostic testing and finish restoration, and quote any new HVAC equipment on its own line.